Our timber driveway entrance gates are made by ourselves to a high standard of craftsmanship
at very reasonable prices compared to the normal standard factory gates seen at most suppliers.
Over fifty-percent of gates we make are bespoke sizes, at no extra cost.
All main joints are morticed & tenoned, oak pegged & glued when necessary.
All softwood timber used for our drive gates is planed, sanded & pressure treated for long life.
Drive gates also made with hardwood, oak, keruing etc, please ask for details.
Barred gates » High heel Keruing Pair high heel painted Diamond brace gates
Tongue & groove » Framed tongue & groove gates Arch top tongue & groove gates
boarded gates
Featheredge » Featheredge 12ftX5ft Featheredge 4ft high Featheredge-brown
boarded gates Featheredge arched tops Courtyard gates range
Picket gates » Double leaf picket
Metal gates » Wrought iron Estate railing gate
Estate railing gate
Traditional estate gate that looks good in any situation.
Hot dip galvanized and powder coated black.
Railings to match this gate also available.
Gate. 3m long. Extra strong tubular rails.
Box section hang and slam stiles.
Adjustable bottom hinge. Padlockable sliding bolt.
Richard Schaub and Son
Established over 30 years
copyright R.G and D.G Schaub
contact us
Back to
Wonderful trees
ancient-tree forum
Richard Schaub and Son
Fencing and Gates
Cheltenham
Drive entrance gates. Any height. Any width
Installation & materials guaranteed
Featheredge gates, 5ft high, 12ft wide, straight tops.
Framework, 4" X 2". Morticed & tennoned joints. Framework planed & sanded, boards sanded. Pressure treated green.
Posts, 7" X 7". Planed & sanded. Four-way weathered tops. Concreted 36" beneath ground
Wooden Featheredge gates 4ft high. 3"x2" framework. 5" boards, overlapping min 1" and sitting on a gravel board. Counter-railed and capped. All timber, planed and sanded and pressure treated.
Posts, 7"x7" (bigger gate) concreted 36" beneath ground. 5"x5" (smaller gate) concreted 24" beneath ground and anchored to the wall with rag-bolt. Post tops, 4 way weathered.
Furniture includes: All galvanised, heavy hooks and band hinges, 18" drop bolt, ring-pull latch and a brenton bolt to allow for a padlock.
Click images to enlarge
Wooden Barred entrance gates. All widths. Full planed and sanded. Singles or doubles with pedestrian side gate. Pressure treated.
Posts. Hang, 8"X8", Slam, 7"X7", fully planed. Pressure treated.
Concreted 36" beneath ground.
Furniture. All furniture galvanised, includes, adjustable double strap hinges, drop bolt and loop over latch.
Barred entrance driveway gates/Five bar gates
Our best quality high heel Our med quality high heel & pedestrian
Wood Featheredge gates 6ft-6" high. 12ft wide. Bow top. 4"x2" framework. 5" boards, overlapping min 1" and sitting on a gravel board. Counter-railed and capped with a steamed shaped cap. All timber planed, sanded and pressure treated.
Posts. 7"X7" or 8"X8" concreted 36" beneath ground.
Furniture includes: All galvanised, heavy hooks and band hinges, 2x18" drop bolts, ring-pull latch and a brenton bolts to allow for a padlock.
Wood Featheredge gates 6ft high. Bow top. 4"x2" framework. 5" boards, overlapping min 1" and sitting on a gravel board. Counter-railed and capped with a steamed shaped cap. All timber planed, sanded and pressure treated.
Posts. 4"x2" wall plates anchored to wall (to give extra width for car access)
Furniture includes: All galvanised, heavy hooks and band hinges, 18" drop bolt, ring-pull latch and a brenton bolt to allow for a padlock.
Keruing diamond braced. 10ft main gate with 4ft pedestrian gate.
Posts. Both hang posts 7"X7" sanded. Tops, four-way weathered. Concreted 36" beneath ground.
Furniture. 24" double strap hinge set, drop bolt & loop-over latch.
Keruing gates installed at the
Wildfowl trust, Slimbridge.
A nice set of painted high heel estate gates showing front & rear.
Gates and furniture supplied by Jacksons fine fencing.
Painted & installed by us.
High heel estate gates 12ft entrance Pair 6ft each leaf. Painted white.
Posts. 7"X7" sanded, concreted 36" beneath ground.
Furniture. Adjustable strap hinges, loop-over latch & drop bolt.
7ft high featheredge gates, 14ft wide, straight tops.
Framework, 4" X 2". Both the framework & boards are plain sawn, pressure treated brown.
Posts. 7" X 7" oak, concreted 36" beneath ground.
An excellent value gate.
Featheredge gates, 6ft high, 12ft wide, straight tops.
Framework, 4" X 2". Boards & framework sanded & pressure treated brown with a darker brown stain.
Posts, 7" X 7".
Our medium quality gate, excellent value for money.
Metal gates on stone pillars
Metal gates on stone pillars.
Natural stone pillars with metal reinforcement through the centre of the pillars and embedded into the footings.
Pillars, 30" square, 78" high.
Gates, 14ft width.
All stonework pillars are built to a high standard by ourselves.
Featheredge boarded gates
Best quality gates, excellent value for money.
Picket drive gates
Featheredge gates with arched tops
Featheredge gates, brown with straight tops
Featheredge gates with straight tops
Pair picket gates 8ft total width X 3ft high. Picket tops shaped to our own design.
Furniture consists of adjustable hooks & band hinges, drop bolt & sliding pad-bolt.
Posts 6" X 6" concreted 32" beneath ground.
All timber pressure treated for long life.
Click images to enlarge
Painted gates
Estate railing gate
Railing panel courtyard gates These courtyard gates are craftsman made using metal and wood to great effect. These gates have an attractive rail panel inset with collar motifs on alternate bars adding that little extra touch of elegance.
Courtyard range
The Courtyard range of gates although not made by ourselves, are constructed using
the highest quality timber and materials & carry a 25 year treatment guarantee.
Please phone for details.
1.
2.
Cathedral courtyard gates Elegant concave topped gates with attractive arrowhead shaped apertures. A quality set of craftsman built gates.
3.
Hythe gates
Rye gates
4.
5.
Sandwich gates
6
Rye gates, rear veiw.
With galvanized posts
These courtyard gates include
> Superior quality Jakcured timber guaranteed for 25 years.
> Internal galvanized frame.
> Integral hinges.
> All fittings and fixings galvanized or stainless steel.
> Easily automated.
> Clad on both sides. Looks good inside as well as outside.
> Galvanized metal posts as standard.
> Metal posts can be wooden cased.
> Posts can be powder coated black or brown.
> Brick piers can be built around galvanized posts.
Galvanized internal frame for extra strength and durability with integral hinge. Gate is clad on both sides. See pics 4 & 6
Click images to enlarge
Five bar diamond braced entrance gates. 9ft with a 3ft pedestrian gate. Fully planed and sanded. Pressure treated.
Posts. Hang post for the main gate, 8"X8" and 7"X7" hang post for the 3ft gate. Posts fully planed and pressure treated.
Concreted 36" beneath ground.
Furniture. All furniture galvanised, includes, adjustable double strap hinges, drop bolt and loop over latch.
See also our field gates
Planed and sanded 9ft diamond braced drive gate with a 3ft pedestrian gate